Finite element models give results element by element. An integration line sums the forces of a group of plates and members, so cores, walls, slab strips and shells can be read as total forces and moments.
- An integration line is an axis defined by two points, associated with a group of plates and/or members.
- At each division, the total forces on the cutting plane are computed, with moments that include the lever arm from the axis.
- Results are given in spreadsheets or graphs, with the force distribution across each cutting plane.
- Applications: cores, plate and member groups, slab strips and curved shells.
The Integration Line
The integration line is defined by two points and is associated with a group of plates and/or members. For a core, it creates an axis that passes through the centre of gravity of the core. The internal axes of the line form the line coordinate system.
The divisions along the line are the cutting planes. At each one, the program computes the total forces Fx, Fy, Fz, Mx, My and Mz acting on the cutting plane. The moments take into account the lever arm of each force from the axis. The distribution of the forces across each cutting plane can also be displayed.
- Integration Line: defines the line and its group of plates and/or members
- Integration Line Forces (Cores): total forces at each cutting plane
- Integration Lines Unit Transverse Forces: force distribution across a cutting plane
Integration Lines for Cores
In the core example, the core is loaded laterally by a seismic load in the X direction. The Contours button of the Results toolbar displays the iso-stresses, the deflection of the core and the axial forces in the concrete walls as iso-colors.
The integration line gives the total forces at each division, in spreadsheets or graphically, with the same command used to display member results. The bending moment Mz and the shear force Fy are shown along the core. The total Mz comes mainly from the integration of the axial forces in the core plates.
The Integration Lines Unit Transverse Forces command shows the axial forces in the core at a cutting plane, for example at 16784.3 mm for a seismic load combination.
Integration Lines for a Plate and/or Member Group
Three identical beams, each fixed at one end and pinned at the other, are modeled in three different ways:
| Model | Web | Flanges |
|---|---|---|
| Model 1 | Member elements only, with a defined section shape | |
| Model 2 | Plate elements | Member elements (200 mm × 10 mm rectangular sections) |
| Model 3 | Plate elements | Plate elements |
Integration lines are assigned to Models 2 and 3, so their forces are accumulated and displayed as graphs or tables, like the results of Model 1. The paper shows the deformed shapes of the three models, the Mz (bending) and Fy (shear) curves on the integration lines, and the force distribution of Model 3 at cutting planes of 3093.33 mm (compression and tension) and 4292 mm (shear).
Integration Line for the Analysis of a Slab
An integration line applied to a strip of a two-way slab gives the total bending moment Mz (member convention) at each cutting plane. For uniform reinforcement across the width of the strip, two design conditions must be met:
- Total moment. The total reinforcement in the band must resist the total factored moment of the band (Mzdes Mean).
- Moment per unit width. The moment resistance per unit width must be at least two-thirds of the maximum factored moment intensity in the band (Mzdes Ext).
| Result | Meaning |
|---|---|
| Mzdes Mean | Total factored moment of the band |
| Mzdes Ext | Maximum factored moment intensity in the band |
| Mzdes Unif | The larger of Mzdes Mean and 2/3 of Mzdes Ext. A simplification that verifies both conditions. |
Wood-Armer Method
When the reinforcement is not oriented along the principal moment directions (Mxy ≠ 0), the Wood-Armer method combines bending and torsion to obtain the design moments:
On the integration line, Mzdes is obtained by combining the bending and torsion distribution curves across the strip, both displayed with the Integration Lines Unit Transverse Forces command. The design moments can also be displayed on the slab as iso-colors.
Results on finite elements use a different convention from member results. In the plate convention, Mz is used for the reinforcement in the Z direction. For a slab in the XZ plane, the plate Mz acts about the X axis.
Integration Line for the Analysis of a Curved Shell
Curved shell results can be viewed with iso-colors and with integration lines. Results on an integration line can be displayed in two coordinate systems:
Frequently Asked Questions
What is an integration line?
An integration line is an axis defined by two points and associated with a group of plates and/or members. At each division of the line, the total forces on the cutting plane are computed, and the moments include the lever arm from the axis.
Which results does an integration line give?
Total forces at each cutting plane (Fx, Fy, Fz, Mx, My, Mz), in spreadsheets or as graphs, and the distribution of the forces across each cutting plane.
How is an integration line used for a slab strip?
The total bending moment Mz is obtained at each cutting plane of the strip. The design moments Mzdes Mean, Mzdes Ext and Mzdes Unif are used to check the two conditions for uniform reinforcement across the strip, and the Wood-Armer method combines bending and torsion when the reinforcement is not aligned with the principal moments.
Why use the normal coordinate system for a curved shell?
The normal coordinate system follows the normal z axis of each plate, so it varies from element to element. This makes results easier to interpret on curved surfaces, where each element has a different orientation.
Learn More
Structural Analysis
Read Plate and Member Results as Total Forces
Integration lines for cores, slab strips and curved shells, with total forces at every cutting plane.