The punching shear analysis is directly linked to any joints that has been defined as a slab support of type column in the concrete tab of a joint properties.
The SAFI software allows users to animate results from different types of analysis.
In the interface of SAFI, users can create a catenary cable by associating a cable type section to a member.
It is possible to see the section properties on the straight axes by clicking on the Additional Properties button.
Restrained warping for the torsion of thin-wall open sections is not included in most commonly used frame analysis programs.
The program allows defining built-up sections whose properties are calculated by the means of a finite element model.
In SAFI, three approaches are available to obtain the maximum displacements and forces of a structure subjected to an earthquake.
Spatial objects are used to model non structural secondary elements attached to the structure. These elements add no stiffness to the existing model.
The variable sections are sections for which the dimensions vary according to the position on the physical member.
The integration line command allows associating a group of plates and/or members to a reference axis system called an integration line.
It is possible to obtain the stress distribution on the section at a specific point along a member using the Advanced Section Stress Analysis command.
When a diaphragm is activated, the program creates a finite elements mesh in the plane of the surface.
The SAFI software allows specifying member end releases on all six degrees of freedom.
SAFI features a solver based on sparse matrix storage (compressed storage) in order to reduce the analysis time and memory usage of large models analysis.
Real structures contain defects, zones of partial yielding and residual stresses that are not taken into account in the numerical models.
Enhancing productivity, the GSE software calculates the resistance limit states under fire conditions for large cross-section wood elements.
Enhancing productivity, the GSE software considers continuous tie down systems and their effects on the shearwall properties.
Design cold formed steel members based on the North American specifications CSA S136-16 & AISI S100-16.
The software computes the live load reduction factor (LLRF) that will reduce the effective axial compression force in columns.
The soil-structure interaction is an important component in the design of a building or any structure in general. In order to improve the productivity of SAFI users, an automatic slab on grade generation function has been added.
The concrete slab design assistant allows the user to quickly generate the design strips of a concrete slab.
Concrete buildings are widely used in the construction industry. In such structures, slabs are key structural elements resisting the gravity and live loads of each floor.
This feature allows users to quickly define various types of loads on all the plate elements present in the selected perimeters.
Modeling a light framing wall or a shearwall is possible with the wall creation tools.
Compression, tension, bending, compression bending, tension-bending, shear, bearing, deflections and slenderness.
To improve the productivity of GSE users, the floor joists are automatically generated inside the truss load surfaces.
A step has been added into the highway sign wizard so all fatigue parameters for the structure can be set efficiently.
It is possible to model 4 types of panels: Simple panels, Reinforced panels, Variable Message Signs (VMS) and Walkways.
The Petroleum Structural Engineering software automates wind loads applied to members based on the projected area, projected pressures or velocity components approaches.
The integration of IFC in SAFI enables importation of models from a large number of architectural and structural software.