Learn with SAFI™
Search or browse by topic: practical guides, design code explainers, worked examples and technical papers from the SAFI™ engineering team.
Our engineering team is preparing the first Knowledge Center articles. In the meantime, watch our short tutorial videos.
Watch the tutorials →Try another word or topic, or ask our engineers directly.
· Ask technical support →
Sawn lumber, glulam and LVL, PSL and LSL member design to CSA O86 and NDS in GSE™ Timber, with section libraries and automatic wood grade selection.
Read the article →
Concentrated loads, uniform and variable pressures and thermal gradient loads on concrete slab contours in GSE™ Concrete, kept when the mesh changes.
Read the article →
Automatic column lines, column strips and middle strips, width uniformization and integration lines for reinforced concrete slabs in GSE™ Concrete.
Read the article →
Automatic floor joists in truss load surfaces, bending, shear, bearing and deflection to CSA O86 and NDS, and floor vibration to NBCC in GSE™ Timber.
Read the article →
Parametric bearing and shear walls with openings, wood floor diaphragms, I-joist libraries, floor vibration and TPIC truss design in GSE™ Timber.
Read the article →Import IFC4 to IFC4x3 models with the Structural Analysis View or the Architectural Coordination View, with slab, wall and automatic connectivity options.
Read the article →
Simple and reinforced sign panels, variable message signs and walkways, deflection and thermal load combinations, and anchor rods in HSE®.
Read the article →
Galloping, natural wind gust and truck-induced gust loads, and CAFT checks on connections and anchor rods to AASHTO LTS in HSE®.
Read the article →
Compression-only Winkler soil springs, soil pressure and uplift checks, and slab design to ACI 318 or CSA A23.3 in GSE™.
Read the article →Automatic column live load reduction to NBCC, ASCE 7 or custom methods, with tributary areas, LLRF and the effective compression force.
Read the article →Cold-formed angles, channels, Z and hat sections to AISI S100 and CSA S136, with effective width properties, distortional buckling and web crippling.
Read the article →
Multi-story wood shear walls with continuous tie-down rods: wood and steel rod chords, transformed moment of inertia and deflection checks to NDS and CSA O86.
Read the article →
Fire design of sawn wood, glulam and SCL members to NDS and CSA O86, with reduced cross-sections and automatic fire load combinations.
Read the article →Automatic wind loads on members with code drag factors for API 4F, ASCE 7, NBCC and CSA S6, wind profiles in several directions and API 4F wind walls.
Read the article →Sum plate and member forces at each cutting plane: total moments in cores, slab strip design moments with Wood-Armer, and curved shells.
Read the article →Define members whose dimensions vary along their length, with linear, quadratic or cubic interpolation of source sections.
Read the article →
Model non-structural elements as spatial objects, with concentrated, pressure and wind loads transferred to the structure through attach joints.
Read the article →Three seismic methods to NBCC and ASCE 7, with floor forces, accidental torsion, SRSS/CQC modal combinations and base shear calibration.
Read the article →Capped, boxed and angle shapes with finite-element properties, section classes, plates or lacing, and full steel verification.
Read the article →
Restrained warping of thin-walled open steel sections: torsion and warping stresses, bi-moment, rotation and steel checks, validated with AISC Design Guide 9.
Read the article →
Principal vs straight axes for single angles and asymmetric sections: properties, deflections, shear forces and moments, with design on the principal axes.
Read the article →Tension-only catenary cables, automatic undeformed length from pretension, minimum tension or sag, and nonlinear structural analysis.
Read the article →Animate displacements, internal forces, mode shapes and time-history results to see how your structure behaves and find the critical areas.
Read the article →
How GSE™ Concrete finds the shear perimeter around column supports, with manual or automatic support properties and openings near the column.
Read the article →
Cracked and long-term slab deflection with the effective moment of inertia, creep and shrinkage, and automatic SLS span checks to CSA A23.3 and ACI 318.
Read the article →It is possible to obtain the stress distribution on the section at a specific point along a member using the Advanced Section Stress Analysis command.
When a diaphragm is activated, the program creates a finite elements mesh in the plane of the surface.
The SAFI software allows specifying member end releases on all six degrees of freedom.
SAFI features a solver based on sparse matrix storage (compressed storage) in order to reduce the analysis time and memory usage of large models analysis.
Real structures contain defects, zones of partial yielding and residual stresses that are not taken into account in the numerical models.